A paint job is 80% preparation and 20% paint — which is why cheap paint jobs fail within two years. FAIME painting crews prep, prime, and apply two premium finish coats on every project, interior or exterior, across the GTA.
FAIME Construction offers dedicated interior and exterior painting across the GTA — full surface prep, surface-matched primer and two premium finish coats (Benjamin Moore / Sherwin-Williams). We also handle cabinet refinishing, pre-sale repaints and exterior colour matching for homes and commercial properties in Toronto, Vaughan, Mississauga and Brampton.15+ years of trade experience · 100+ GTA projects · WSIB Active · $2M CGL · Free site visits
From a single feature wall to a whole-house repaint or a full exterior, FAIME treats paint as a system — surface prep, primer, and premium finish coats — not a rushed afternoon with a roller. Need drywall work first? See our dedicated drywall page.
Premium interior painting with proper prep, primer, and two finish coats minimum — walls, ceilings, and trim cut in by hand for clean lines.
GTA weather punishes shortcuts. FAIME uses premium exterior products, proper prep, and applies in the right conditions — so the finish survives the freeze-thaw cycle.
Whole-house repaints before listing and suite turnover painting for landlords and property managers — fast mobilization, photo-ready results.
When paint peels at 18 months, the failure happened weeks earlier — dirty surfaces, skipped primer, thin coats. FAIME's painting discipline exists so that never happens to your walls.
Washing, sanding, patching, and caulking before any paint goes on. Most of a great paint job happens before the can is opened.
Drywall primer on new board, stain-blocking primer on water marks, bonding primer on glossy trim. Skipping primer is how paint peels.
Benjamin Moore and Sherwin-Williams on every project — product that actually covers in two coats and holds its colour for years.
The first coat dries fully and gets inspected under side-light for holidays and roller marks before the second coat goes on.
Floors, fixtures, tile, and cabinets are properly masked before painting begins. No spatter on your hardwood, no overspray on your new tile.
Trim, ceilings, and corners cut in by hand — crisp, straight lines at every intersection instead of taped-and-prayed edges.
When existing exterior surfaces need to match — columns, trim, fascia, stucco — FAIME applies colour-matched semi-gloss that blends seamlessly. No visible patchwork.
Free site visit, written scope and quote. Colour consultation support if you want it — including samples on your actual walls under your actual lighting.
Floors covered, fixtures masked, furniture moved or wrapped. Exterior: landscaping, windows, and hardware protected before any prep starts.
Wash, sand, patch, and caulk. Loose or failing old paint is removed, not painted over. Glossy surfaces are scuffed for adhesion.
The correct primer for each surface, applied as a full coat — not spot-primed where it's convenient. Scuff-sand between primer and finish.
First coat dries fully and is checked under raking light. Second coat delivers the depth of colour that separates professional from DIY.
Touch-ups completed, protection removed, hardware reinstalled, site cleaned. You walk every room with us before we call it done.
Get a written painting estimate — a single feature wall, a whole-house repaint, or a full exterior.
Reviews help GTA homeowners and contractors find a trusted specialty team. If we earned your confidence, we'd be grateful for 60 seconds of your time.
Leave Us a Google ReviewTakes 60 seconds — helps us more than you know